T+A | PA 1100 E - Integrated Amplifier with DAC [Ex-demo]
This T+A PA 1100 E Integrated amplifier is an ex-demonstration item. The amplifier is in overall excellent condition, with the exception of some minor marks on the front panel casework. Comes complete with original manufacturers packaging and accessories.
PLEASE NOTE: Product images shown are the manufacturers stock images, for additional images or additional information please contact us.
FREE SHIPPING | Please note that we do not ship outside the UK mainland.
The sole difference lies in the inputs: one of the PA 1000 E’s symmetrical inputs has been replaced by a digital input board. This board operates completely autonomously from the rest of the machine, and separate voltages are fed to its digital and analogue sections. The board is fitted with its own micro-processor which assumes full control of the digital inputs, filters and converter. For this reason it has no influence of any kind on the analogue signal processing and sound qualities of the PA 1100 E. The high-quality Bluetooth® module provides music transfer from mobile devices at superb aptX™ quality.
The digital input board enables many digital sources to be connected directly at very high quality, using either coax or optical inputs. The USB-B input even makes it possible to play very high-resolution files from a PC or via Ethernet / USB bridges such as Roon or NAA, using data rates of up to 384 kSps for PCM and up to DSD 256.
The high-quality Bluetooth module provides music transfer from mobile devices at superb aptX™ quality, and the BT player can be controlled using the AVRCP protocol.
A further option is the additional installation of an HDMI circuit board featuring two input and one output socket with Audio Return channel for the television set. Sound output is exclusively in stereo.
The digital data are converted into analogue signals to very high standards of quality and resolution by the modern 32-bit converter. A further refinement for PCM data are two different oversampling algorithms: one of them a standard FIR filter, the other the Bezier oversampling developed by T+A, offering outstanding timing and transient handling.
The PA 1100 E can either be controlled directly on the machine itself, or using the FM 11 remote control handset supplied with the machine in conjunction with the E 2000 IR receiver. The latter can be set up anywhere close to the PA 1100 E, and connected to the RC-In socket on the back panel.
Nominal output per channel 4 Ohms / 8 Ohms
2 x 250 Watts / 2 x 140 Watts
Peak output per channel 4 Ohm / 8 Ohm
2 x 400 Watts / 2 x 220 Watts
Frequency response -3dB
1 Hz - 60 kHz
Total harmonic distortion / Intermodulation
< 0,004 % / < 0,004 %
Pre amplifier (PRE, REC)
Total harmonic distortion
Signal / noise ratio
> 82 dB
Inputs 5 x RCA
250 mVeff ... 3 Veff / 20 kOhms
Inputs 1 x balanced (XLR)
500 mVeff ... 6 Veff / 5 kOhms
Outputs 2 x RCA
PRE OUT, REC OUT 2,5 Veff / 50 Ohms;
Headphones 6,3 mm plug > 32 Ohms
Digital section (DAC, Inputs)
PCM: 32-bit Sigma Delta, 384 kSps
DSD: up to DSD 256 (11,2 MHz)
switchable oversampling algorithems: Standard-FIR and T+A Bezier
2 x SP/DIF coax.
PCM 32 ... 192 kSps
2 x TOSLINK opt.
PCM 32 ... 192 kSps
1 x USB-B
PCM 32 ... 384 kSps. DSD 64 ... DSD 256 (MAC-OS up to DSD 128)
2 x HDMI,
1 x HDMI (ARC)
Stereo: PCM 32 ... 384 kSps, DSD 64
Stereo: PCM 32 ... 192 kSps
APT-X, MP3, AAC, SBC. AVRCP.
Mains / Accessories / Dimensions
plug-in phono module MM, 1 - 5 mV, 16 capacitance values
plug-in phono module MC, 60 - 1000 µV, 16 impedance values
plug-in HDMI Module
FM 11 with E 2000
220-240 V or 110-120 V, 50-60 Hz, 600 W
< 0,5 Watts
Dimensions (H x W x D)
11,5 x 44 x 38 in cm
Silver case (47) + black side panels (21)
Silver case (47)+ silver side panels (47)
Black case (21) + black side panels (21)
PHE-MM or MC | HDMI module | Power Three HD (Carbon) | Power Bar | Audio Duo (Carbon) | Speaker Hex (Carbon)