ProAc | Response DB1 - Stand Mount Loudspeakers
SKU:
£2,550.00
£2,550.00 - £3,000.00
per item
Small appearance with large stage presence. Meet the New Response DB1.
With the DB1, ProAc has achieved in a small speaker, a sound normally associated with a larger speaker, particularly the bass response.
The DB1 cabinet is made from different thicknesses of high density MDF and further damped by bitumen to control cabinet resonance. A newly designed long throw bass driver was used and ported at the rear. The cone is made from pulp and mica which is then elastic coated and fitted with our ProAc acrylic pole damping phase plug.
AVAILABLE TO ORDER | IN-STORE COLLECTION ONLY - Please contact us for information on stock availability and lead time before making a purchase
The crossover was designed to give a flatter response at high levels and the tweeter is the ProAc 1-inch silk dome similar to that used in other ProAc Response models.
The midrange and high frequencies of the DB1 are superb and in the ProAc tradition, low in colouration and high in detail. The bass driver gives a wonderful bass quality, punchy and extended, similar to that which is experienced in a larger enclosure. The resulting sound stage is also comparable to that of a larger speaker.
Small mini monitor type loudspeakers, such as the DB1 have become very popular for those wishing for a high-quality sound with a minimal visual impact.
The midrange and high frequencies of the DB1 are superb and in the ProAc tradition, low in colouration and high in detail. The bass driver gives a wonderful bass quality, punchy and extended, similar to that which is experienced in a larger enclosure. The resulting sound stage is also comparable to that of a larger speaker.
Small mini monitor type loudspeakers, such as the DB1 have become very popular for those wishing for a high-quality sound with a minimal visual impact.
Specifications
|
Nominal Impedance
8 ohms Recommended Amplifiers 20 to 100 watts Frequency Response 35Hz to 30kHz +/- 3dB 50Hz-20KHz Sensitivity 87.5 db linear for 1 watt at 1 metre Cabinet Heavy, inert construction damped with special material and featuring slim, rigid front baffle design to aid dispersion. Bass/Midrange ProAc 5 inch long throw unit with mikapulp cone and acrylic phase plug. Tweeter ProAc 1 inch silk dome with special coolant. Crossover Finest components on dedicated circuit board with multistrand oxygen-free copper cable throughout. Split for optional bi-wiring/bi-amping. 2.9KHz frequency |
Dimensions
12.5" (320mm) high, 7.28" (182mm) wide, 11.2" (280mm) deep including grille thickness of 12mm Weight 19.6lbs (8.8 Kgs) Mode Stand mounted Grille Acoustically transparent crimplene Finish Standard Finishes: Black Ash, Mahogany, Cherry, Maple, Walnut. Premium Finishes: Rosewood, Ebony, Burr Oak. *Premium Finishes to order at extra cost* |
