ProAc | Response DB3
STAND MOUNT LOUDSPEAKERS
From £1,930
Tel. 01736 368004
A high-end stand-mount loudspeaker at an affordable price
The Response DB3 has a similar cabinet size to the Response DB1 but there are structural and visual differences. The DB3 also employs a different bass driver with a special surround, dust cap and crossover which have been chosen for their exceptional performance at a more affordable price.
The Response DB3 has a wonderfully rich and extended bass quality, loaded with a single reflex port at the rear of the cabinet. The tweeter is our ProAc 1-inch soft dome as used in other Response Range designs. This 1-inch silk dome has a superb flat response with electrostatic type detail and sweetness.
With the DB3, ProAc has created a small speaker with better efficiency and a rich sound that defies its physical size.
The Response DB3 has a wonderfully rich and extended bass quality, loaded with a single reflex port at the rear of the cabinet. The tweeter is our ProAc 1-inch soft dome as used in other Response Range designs. This 1-inch silk dome has a superb flat response with electrostatic type detail and sweetness.
With the DB3, ProAc has created a small speaker with better efficiency and a rich sound that defies its physical size.
SPECIFICATIONS
|
Nominal Impedance
8 ohms Recommended Amplifiers 20 to 100 watts Frequency Response 38Hz to 30kHz Sensitivity 88.5 db linear for 1 watt at 1 metre Bass/Midrange ProAc 5 inch long throw unit with mikapulp cone and transparent dust cap. Tweeter ProAc 1 inch silk dome with special coolant. Crossover Finest components on dedicated circuit board. Multistrand oxygen free copper cable throughout. Split for optional Bi wiring or Bi amplification |
Dimensions
12.5" (320mm) high, 7.28" (182mm) wide, 10.4" (280mm) Weight 19.6lbs (8.8 Kgs) each Mode Stand mounted Grille Acoustically transparent crimplene Standard Finishes Black Ash, Mahogany, Cherry, Walnut, Oak, Silk White. Premium Finishes Rosewood, Ebony. *Premium Finishes to order at extra cost* |
