Hana | Umami Red
MC CARTRIDGE
£3,399
Tel. 01736 368004
The HANA-Umami Red hand-built MC cartridge embodies ‘Umami’ – officially coined in 1908 by Japanese chemist Kikunae Ikeda-san as a very pleasing or delicious flavour on the palette, a synergistic effect resulting in higher taste intensity.
Hana’s Master cartridge designer Maseo Okada-san applies this concept as he combines brilliant materials and classic Japanese techniques with modern audio engineering to create his Hana Umami Red low output MC cartridge.
The cryogenically treated MC generator features a samarium/cobalt magnet with a pure-iron square plate armature, hand-wound with high purity 30-micron copper wire for an internal impedance of 6Ω and 0.4mV output.
A Nude Microline stylus is bonded to a solid Boron cantilever for tracing the most delicate musical nuances from the LP.
The HANA-Umami Red exclusive Auricle™ body design (with tapped mounting holes) mimics the shape of the human outer ear to rigidly support the cryogenically treated “Open Air” Moving Coil generator. It is machined from a hard Duralumin with a multi-layered Urushi lacquer finish originating from the Japanese Makie-artistic tradition and incorporates an Ebony Wood inlay resonance damper. An easy to fit stylus guard protects your investment.
All the major parts of the HANA-Umami Red are manufactured in house by Excel Sound with its highly trained craftsmen skilfully hand assembling each cartridge. Master designer Okada-san brings over 50 years of experience to this design, applying the Umami concept of synergy with the HANA-Umami Red.
The Umami Red offers 0.4mv/1KHz output.
2 year guarantee and a ‘new for old or damaged’ replacement service.
Hana’s Master cartridge designer Maseo Okada-san applies this concept as he combines brilliant materials and classic Japanese techniques with modern audio engineering to create his Hana Umami Red low output MC cartridge.
The cryogenically treated MC generator features a samarium/cobalt magnet with a pure-iron square plate armature, hand-wound with high purity 30-micron copper wire for an internal impedance of 6Ω and 0.4mV output.
A Nude Microline stylus is bonded to a solid Boron cantilever for tracing the most delicate musical nuances from the LP.
The HANA-Umami Red exclusive Auricle™ body design (with tapped mounting holes) mimics the shape of the human outer ear to rigidly support the cryogenically treated “Open Air” Moving Coil generator. It is machined from a hard Duralumin with a multi-layered Urushi lacquer finish originating from the Japanese Makie-artistic tradition and incorporates an Ebony Wood inlay resonance damper. An easy to fit stylus guard protects your investment.
All the major parts of the HANA-Umami Red are manufactured in house by Excel Sound with its highly trained craftsmen skilfully hand assembling each cartridge. Master designer Okada-san brings over 50 years of experience to this design, applying the Umami concept of synergy with the HANA-Umami Red.
The Umami Red offers 0.4mv/1KHz output.
2 year guarantee and a ‘new for old or damaged’ replacement service.
TECHNICAL SPECIFICATIONS
Body Material Duralumin (A7075), Ebony Wood
Body Finish Gloos Urushi Lacquer/ Red Cantilever Boron Stylus Microline Nude Diamond Armature Material Permalloy Armature Shape Square Parts Material Pure Iron Magnet Samarium Colbalt Terminal Plate PEEK (Polyether Ether Ketone) Terminal Pin 24K Gold Plated Coil Impedance 6Ω/1kHz |
Coil Output Level 0.4mV/1kHz
Coil Wire Material High Purity Copper Terminating Impedance >60Ω Cryo-genic treatment Yes Frequency Response 15~50,000Hz Output Balance 0.5dB/1kHz Channel Separation >30dB/1kHz Tracking Force Weight 2 gr. Trackability 70μm/2gr Dynamic Compliance 10 x 10(-6) cm/dyne (100Hz) Dynamic Compliance 16 x 10(-6) cm/dyne (100Hz) Cartridge Weight 10.5 gr. |