ATC | SCM150
ACTIVE / PASSIVE LOUDSPEAKERS
From £21,250
Tel. 01736 368004
The SCM150 ASL (active) and SCM150 SL (passive) are designed to perform at their best with the finest quality hi-fi equipment.
Like their smaller brother, the SCM50 ASL & 100 the monitors’ ability to reproduce music and speech with phenomenal accuracy, transparency and dynamics lies mainly in the SM75-150s soft dome midrange driver. However, recent modifications that include an upgraded tweeter and enhanced port profile have brought about further improvements in all performance parameters.
Like their smaller brother, the SCM50 ASL & 100 the monitors’ ability to reproduce music and speech with phenomenal accuracy, transparency and dynamics lies mainly in the SM75-150s soft dome midrange driver. However, recent modifications that include an upgraded tweeter and enhanced port profile have brought about further improvements in all performance parameters.
|
Bass performance is equally impressive, thanks to ATC’s 15″ professional level bass driver that incorporates the company’s unique Super Linear Magnet technology. Bass, mid and HF drive units in the active model have their own dedicated and individually matched MOS-FET amplifiers.
ATC’s active crossover network consists of a wide band-width, electronically balanced input stage with high common mode rejection and very low distortion. In passive form, the SCM150 SL provides broad and symmetrical dispersion, excellent amplitude and phase characteristics throughout the audio frequency range. Speakers are supplied with stands and fabric wrapped grills. |
AVAILABLE FINISHES
Standard Veneers Cherry, Walnut, Oak & Black Ash. Standard Paints Satin Black, Satin White Premium Veneers (up-charge applies) Rosewood, European Crown Cut Walnut, Pippy Oak, Burr Magnolia. High Gloss (up-charge applies) Clear High Glossed Veneer, Piano Black, Piano White |
SPECIFICATIONS
|
SCM150ASL (ACTIVE)
Drivers: HF 25mm Mid 75mm LF 375mm Super Linear
Amplitude Linearity ±2dB: 60Hz – 17kHz Frequency Response -6dB: 25Hz & 22kHz Matched Response: ±0.5dB Dispersion: ±80° Coherent Horizontal ±10° Coherent Vertical Max continuous SPL @1m: 117dB SPL Crossover Frequency: 380Hz & 3.5kHz Input Connector: XLR Input Sensitivity: 1V Input Impedance: >10k ohms balanced XLR Amplifier Output: HF 50 Watts RMS MF 100 Watts RMS LF 200 Watts RMS Overload Protection: LDR tweeter protection, plus active FET MGR (amplifiers) Power Requirements: Voltage: 100, 115, 230 (factory set) Frequency: 50/60Hz Power: Nominal 90 Watts, Driven 350 Watts Accessories Inc. (per pair): 2 x Speaker Stands (as shown), 2 x fabric wrapped grills, 8 x M8 x 1.25mm stand spikes and nuts. Cabinet Dimensions(HxWxD): 884 x 498 x 568mm / 34.80 x 19.61 x 22.36″ including amps (stands add 200mm to height) Weight: 75kg |
SCM150SL (PASSIVE)
Drivers: HF 25mm Mid 75mm LF 375mm Super Linear
Amplitude Linearity ±2dB: 60Hz – 17kHz Frequency Response -6dB: 25Hz & 22kHz Matched Response: ±0.5dB Dispersion: ±80° Coherent Horizontal ±10° Coherent Vertical Sensitivity (sine wave): 91dB @ 1W @ 1m Max continuous SPL @1m: 117dB SPL Crossover Frequency: 380Hz & 3.5kHz Input Connector: Binding Posts/4mm banana plugs Recommended Power Amplifier: 100 to 1500 Watts Nominal Impedance: 8 ohms Accessories Inc. (per pair): 2 x Speaker Stands (as shown), 2 x fabric wrapped grills, 8 x M8 x 1.25mm stand spikes and nuts. Cabinet Dimensions(HxWxD): 884 x 498 x 568mm / 34.80 x 19.61 x 22.36″ (stands add 200mm to height) Weight: 67.2kg |
