Elliptical stereo cartridgeThe AT-VM95E, the new Audio-Technica entry model Elliptical cartridge will replace the legendary AT95E and take advantage of the developments of the AT95EX introduced in 2015. The AT-VM95E features an improved and distinctive design resulting in a more rigid low resonance housing, and two threaded inserts in the cartridge body enabling it to be mounted to the headshell or on an integral tonearm with just two screws, no nuts.
|
Styli compatibilityEvery cartridge diamond stylus becomes worn after a period of play.
Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus. Audio Technica's VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus. The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible. AT-VMN95C / AT-VMN95E / AT-VMN95EN / AT-VMN95ML / AT-VMN95SH / AT-VMN95SP |
|
SpecificationsFrequency Response
20 - 22,000 Hz Channel Separation 20 dB (1 kHz) Vertical Tracking Angle 23° Vertical Tracking Force 1.8 to 2.2g (2.0g standard) Stylus Construction Bonded Round Shank |
